Average Reviews:
(More customer reviews)I have tried HVLP conversion guns in the past...Well, cheapy ones and was left dissapointed.A bathroom project that consisted of spraying a significant amount of Urethane and a bathtub with Acrylic polyurethane was on my list so I needed an HVLP and decided I wanted a turbine.Not wanting to invest alot of money I did a tremendous amount of research and decided on the HV2500.Although it is only a 2 stage unit I was satisfied with the specs and decided to give it a try.This unit comes with a fine and general fluid set.For an affordable $15 I bought a thick coatings fluid set should I attempt latex.
I used the Fine fluid set for the clear urethane which came out fantastic with great atomization and no runs.For the white Acrylic Polyurethane on the bathtub I used the generalfluid set with satisfactory results.I got some orange peel but I blame that more on lack of experience than I do the HVLP itself.I need more practice spraying and getting the settings just right.The gun is reasonably easy to clean and should last a while so long as your not using this commercially.The unit comes with a 25' hose which is great to afford you the ability to keep the unit far away from the spraying vacinity and since they sound like vacuum cleaners the farther away the noise the better.
Overall if your looking for a decent HVLP with good parts availability at a really good price, give the HV2500 a try.It may suprise you.
Click Here to see more reviews about: Campbell Hausfeld HV2500 58 CFM Fine Finish HVLP Paint Sprayer
Product Description:
This system is designed to provide a fine finish on wood and metal surfaces. The turbine provides more power and longer life than the HV2000 series systems for use in commercial applications that utilize a wide variety of coatings. The HV2500 is appropriate for lacquers, stains, enamels, and other solvent based materials with flash points higher than 99 degrees Fahrenheit. Paints and solvents that contain hydrogenated hydrocarbons should not be used with this system. It can also spray latex and water borne coatings, some thinning may be required. The system comes complete with turbine, stub hose, 25 foot air hose, semi-professional spray gun equipped with all purpose material fluid set, gun wrench, thin material fluid set, cleaning brush, viscosity stick and cone strainers.
Get 18% OFF
Want to read more honest consumer review about Campbell Hausfeld HV2500 58 CFM Fine Finish HVLP Paint Sprayer now ?
